▶
▶Problem
Cleaning and disinfecting water is a significant cost factor in dairy processing. The client needed a cost-effective way to optimise water disinfection and meet strict national standards.
- Home
- References
- Dairy process hygiene
Voigtländer · Case study
Dairy process hygiene
Process water and cleaning application
approx. 100 m³Daily water treated
Water taskCIP and process hygiene
Operating sectorFood and beverage
System familyVoigtländer water hygiene
At a glance
The application and system essentials.
approx. 100 m³Daily water treated
operating parameters storedAudit documentation
Source: Voigtländer case study.
The application
Water hygiene for dairy processing and cleaning
Anolyte is dosed directly into the main water pipe for dairy process water disinfection. The system stores operating parameters for audits.
Water taskCIP and process hygiene
Treatment routeVoigtländer water hygiene
3D illustration created with AI Solution
The Voigtländer system doses Anolyte directly into the main water pipe, treating about 100 m³ per day. Measurement and control features store operating parameters for audits.
Results
- Compliance with applicable drinking-water standards
- Reduced maintenance effort
- Lower disinfection-related operating cost
- Improved water quality for dairy production
Project scope
- Daily water disinfection of about 100 m³
- Compliance with water standards
- Cost-efficient treatment
- Operational efficiency improvement
The process
From generator to dosing point, measured throughout
Inlet and water meter, brine tank, the three-chamber generator, anolyte tank, demand-led dosing, measurement and control. Press “Show me the process” to start the animated 3D diagram.
ready
Modelled from the Voigtländer plant schematic of an anolyte system, in the drawing language of the home page. The cards show documented facts only, no invented figures.
Scope of the results
What this project shows and what it cannot promise.
An installation, evaluated within its own operating context.
Shown here
- Voigtländer water hygiene applied to CIP and process hygiene.
- Daily water treated: approx. 100 m³
- Audit documentation: operating parameters stored
Not a general guarantee
- Results and capacities cannot be transferred to another water composition or operating regime without assessment.
- Design and expected performance for a new site depend on its own water analysis and process conditions.
From reference to your project
How this works for your site.
This project shows one application. Explore the treatment approach and the decisions that matter before adapting it to your site.
Technical enquiry
Want to compare this case with your site?
Send the operating context and Hydreatio will route the enquiry to the right technical discussion.
Discuss a comparable installation
Describe your water task and constraints so the right specialist can respond.
Start enquiry ›Dairy process hygieneapprox. 100 m³ · Daily water treated
Discuss your project