1. Home
  2. References
  3. Bottling plant hygiene

Voigtländer · Case study

Bottling plant hygiene

Water and process hygiene in bottling

5% solution sprayed directly into the fillerDisinfection solution

Installed equipment, bottling plant

Water taskCIP and process hygiene
Operating sectorFood and beverage
System familyVoigtländer water hygiene

At a glance

The application and system essentials.

5% solution sprayed directly into the fillerDisinfection solution
reduced to once dailyManual cleaning interval

Source: Voigtländer case study.

The application

Water hygiene across the bottling process

An automated electrochemically activated (ECA) water system supports hygiene in the bottling plant through storage, dosing and control, reducing the need for manual cleaning steps.

Water taskCIP and process hygiene
Treatment routeVoigtländer water hygiene
Read the project details

Problem

Manual cleaning interrupted filling time, created downtime and increased operating cost. The client needed to reduce downtime while maintaining hygiene and compliance.

Solution

Voigtländer installed a low-chloride ECA generator, storage tanks and an integrated dosing and control system. The cleaning process sprays a 5% disinfection solution directly into the filler and logs operating data for audits.

Results

  • Manual cleaning intervals reduced to once daily
  • Automated cleaning improved operating efficiency
  • Downtime reduced
  • Hygiene compliance supported

Project scope

  • Automate cleaning process
  • Install ECA generator
  • Reduce downtime
  • Support compliance

The process

From generator to dosing point, measured throughout

Inlet and water meter, brine tank, the three-chamber generator, anolyte tank, demand-led dosing, measurement and control. Press “Show me the process” to start the animated 3D diagram.

ready

Modelled from the Voigtländer plant schematic of an anolyte system, in the drawing language of the home page. The cards show documented facts only, no invented figures.

Scope of the results

What this project shows and what it cannot promise.

An installation, evaluated within its own operating context.

Shown here

  • Voigtländer water hygiene applied to CIP and process hygiene.
  • Disinfection solution: 5% solution sprayed directly into the filler
  • Manual cleaning interval: reduced to once daily

Not a general guarantee

  • Results and capacities cannot be transferred to another water composition or operating regime without assessment.
  • Design and expected performance for a new site depend on its own water analysis and process conditions.

From reference to your project

How this works for your site.

This project shows one application. Explore the treatment approach and the decisions that matter before adapting it to your site.

Technical enquiry

Want to compare this case with your site?

Send the operating context and Hydreatio will route the enquiry to the right technical discussion.

Site-specific assessmentTechnical response

+49 89 90 17 39 75

Discuss a comparable installation

Describe your water task and constraints so the right specialist can respond.

Start enquiry ›

Already have water data?

Send the analysis with your site and process context.

Send analysis ›